How Do I Repair Hydraulics On Kubota Tractor

D2Cat

You plan to buy a new cylinder?

There is a kit to rebuild all the internal seals/wipers available from your dealer or a local hydraulic repair shop. If y'all're not wanting to practice the repair yourself, just remove the cyl. and take information technology to the hydraulic store, when they have it repaired, reinstall it. Much less cost then a new cylinder.

D2Cat

I'd find a dissimilar shop!!

And so the whole cyl. new at Coleman's in $452. Why not become the function number for the repair kit and enquire, but if you're admittedly not mechanically inclined or don't have time or want to endeavour the repair....so the $452 is the answer.

Or purchase the kit and find someone who does mechanical repairs and they may exist interested in installing the kit. Exercise you have any tractor dealer nearby? Ask one of their tech. what it might price to have them install the kit.

fatjay

I buy my cylinders at surplus center. Labor can be intensive on rebuilds, even with the correct tool. The problem is, if you are using on your loader, you may need 2 cylinders, i for each side. Matching mounting distance to exist identical with your cylinder may testify to exist a challenge.

https://www.surpluscenter.com/Hydraulics/Hydraulic-Cylinders/

These guys have done me well and given me bang-up products.

maclean

I've had to replace my tilt cylinder twice...commencement time the dealer took compassion on me and merely charged $125. The second time I had a hydraulic shop rebuild the cylinder for $250.

BAP

Seal kit is around $105 from Kubota co-ordinate to Messick's parts page. It should be virtually an hours piece of work to rebuild if there is not whatsoever problems getting it apart or dorsum together again.

scdeerslayer

I had that place on Shop Road build a hydraulic line for me for my backhoe thumb project. I knew it would be more than ordering it from discounthydraulichose.com just I wanted to get it on that twenty-four hour period. Had I known how much it was really going to cost I probably would have ordered it and waited. When I went to pay they causeless I worked for one of their open account customers, and information technology was like the guy had a hard fourth dimension remembering how to run a credit card. Definitely seems similar they are setup to cater to the heavy equipment crowd, but I don't know of whatever other hydraulic shops in the Columbia surface area.

Hartlife77

Did anyone find aftermarket for this?

DustyRusty

Did anyone observe aftermarket for this?

I dubiety that there is an aftermarket cylinder available, however, I just had 1 of my lift cylinders rebuilt at a local hydraulic shop and I brought them the Kubota kit to use in the rebuild. It cost me $125 in labor, and I prearranged with them for me to expect for the cylinder, since the shop was about an hour away.

Henro

I narrowed down my result with the loader to the hydraulic cylinder, which is leaking internally.

I accept a BX25D with a LA240A front finish loader. The cylinder that I need is the double action cylinder which curls and uncurls the bucket, Kubota's part number is 7J612-64013.

I have searched far and wide and cannot find 1 the right size to replace information technology. Kubota is very proud of theirs at $450 and the aftermarket ones that are close to the correct size are in the $200 range.

Has anyone establish a replacement part for this or know of a source or a cross-reference part number listing? I can't find one anywhere...

Thanks

Check different hydraulic repair shops.

I had both my tilt cylinders on my B2910 loader rebuilt this summer for $100 each out the door. The kubota seal kit would accept toll about half of that delivered.

Accept the cylinder in and let them look at it. They may exist thinking it is something off a larger auto, do not know. When they saw my cylinders the original quote toll (over the telephone) was almost double what it concluded up when they saw what they were dealing with. My replacement cost would take been about $600 each from Kubota.

How Do I Repair Hydraulics On Kubota Tractor

D2Cat

Well-known member

D2Cat

Well-known member

fatjay

Fellow member

BAP

Well-known fellow member

Henro

Well-known fellow member

GeoHorn

Well-known member

0 Response to "How Do I Repair Hydraulics On Kubota Tractor"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel